Yesterday we talked to two kinds of compressed air dryer, freeze drying machine (person) and adsorption type dryer, the principle of them, today we will again to talk about the two categories of their respective characteristics.
First, let's talk about the characteristics of a freeze dryer:
1. Strictly comply with ISO9001 GB standard, QS and pressure vessel inspection specifications to ensure the long-term safety, high efficiency and reliable operation of the products.
Simple installation, simple operation and convenient maintenance.
3. The refrigeration parts and control components adopt international quality brands to improve service life.
The heat transfer area is increased on the basis of standard design, and the heat transfer efficiency is better, which guarantees the stability of the dew point of the machine.
5 special design of the secondary condenser, perfect use of export cold source, ensure the machine refrigeration system cooling effect, while increasing the compressed air outlet temperature, save energy, avoid condensation piping losses.
6. The efficient gas-water separation unit is equipped with excellent automatic drain valve, and the condensate is continuously discharged from the machine.
Safe and reliable protection device (machine equipped with high voltage switch, low pressure switch, water condenser relief valve, overload relay... High precision protection device
The 8E- control series microcomputer control panel (optional accessories) is a real-time operating system based on advanced microprocessor, which is controlled and monitored through a simple and clear user interface. The user can identify any situation during the operation of the dryer at the first time, so as to ensure the sensitive application. At the same time, e-control is equipped with the remote control port and the joint control port to meet the special needs of users.
9. Products can be specially customized (handling capacity is greater than 143Nm/min, special specification, material, temperature, pressure, control mode, etc.).
The characteristics of adsorption dryer are discussed.
1. Strictly comply with ISO9001, GB standard, QS and pressure vessel inspection specifications to ensure product safety and reliable operation. Demanding perfect design, resulting in long-term, efficient and stable operation; With excellent heating components, the regeneration gas temperature is increased, and the regeneration air volume is only 6% of the processing capacity.
The 2E- control series microcomputer control panel is a real-time operating system based on advanced microprocessor, which is fully controlled and monitored through a simple and clear user interface. The user can identify any situation during the operation of the dryer at the first time, so as to ensure the sensitive application. At the same time, e-control is equipped with the remote control port and the joint control port to meet the special needs of users.
3 of pneumatic valve and control valve USES the international high quality brand, at the same time equipped with a specially designed refueling system and oil recovery system, to improve service life and stability also conforms to the saifu, promoting environmental protection concept.
4 valve switch controller by microcomputer control, stable performance, to ensure that the adsorption tower when switching scientific phenomenon, avoid air flow on the impact of the adsorbent, the adsorbent has a longer life expectancy.
5 product can accept a variety of special customization (capacity greater than 110 nm/min, special materials, - 70 ℃ above the dew point temperature, 0.98 MPa pressure, special control mode, etc.).
